Boiler Hire Rapid Energy
Deko Construction Decoration

Etching Ecological EMEX PC ECO

The product Etching Ecological EMEX PC ECO is sold by Romtehnochim company and is part of the Lacquers product category. For more details (pricing, promotions and expert advice) about the product Etching Ecological EMEX PC ECO you can contact the company Romtehnochim via an offer request below.
Etching Ecological EMEX PC ECO
Sold by: Romtehnochim -
Price: 184,8
Request A Quote
Your message has been sent.
Etching Ecological EMEX PC ECO. EMEX PC ECO Pickling Solution is an eco-friendly, professional, highly eco-friendly product based on organic solvents and alcohols. It is used for painting old coatings of paints and enamels applied on wood, metal, masonry, or for the cleaning of adhesives, polyurethane foams, grease, soldering solutions of the type, of natural or synthetic resins, etc.
     This stripper is in the form of a paste, so it can also be applied to vertical surfaces and delay evaporation.

Main Features:

- Easy application;
- Good cleaning performance;
- Do not attack plastics;
- Medium contact time - long;
- Removes difficult contaminants;
- Removes old paint layers;
- Removes synthetic adhesives efficiently;
- Removes graffiti without attacking the substrate;
- The product is environmentally friendly.

Fields of Use:

          EMEX PC ECO is a professional product used to clean and pick old paints and enamels applied on wood, metal and masonry, or to remove synthetic adhesives, polyurethane foams, grease, soldering solutions such as base of natural or synthetic resins, graffiti, etc.
     The action beach of this type of pickle is very large, and for less known materials either the manufacturer's recommendation or pre-tests are required, but we list some of the most common materials to remove: graffiti, acrylic paints and enamels (washable ), synthetic plasters, alkyd urethane paints, nitrocellulose, adhesives such as prenadez, synthetic resin based putty, other products.
     When applied, EMEX PC ECO Eccentron will be used undiluted. It is not recommended in any way to dilute it, except in special situations, and only at the manufacturer's indications. After the inflating effect (approx. 10 - 30 minutes), remove the paint layer (adhesive, etc.) with water under pressure or with the spacer.
     Note that application should be done at a temperature above 5 ° C, and if necessary repeated. In the case of thick coats such as polymeric plasters, in order to obtain the desired effect, it is mandatory to apply an additional layer of EMEX PC ECO Ecopoint before removing the entire film.

Products in the same category: Lacquers

/images/banners/250_250_UKCW_Birminham2022_logo.png