Nano Protect Treatment wood parquet floors, saunas, outdoor furniture, wooden structures

Nano Protect Treatment wood parquet floors, saunas, outdoor furniture, wooden structures. Nano Protect® wood

Nano Protect® wood is a wood-based permanent hydrophobic SiO2 sealing the pores of the outer timber to be applied directly to the timber or over the various film coating, lasur.

NANO-PROTECT ® wood, OSB, MDF, ETC.

DATA SHEET

Field of application:

NANO-PROTECT ® wood is a solution ready for use, transparent wood surfaces with / without finishing industry and commerce.

NANO-PROTECT ® wood is a nanotechnology solution for long-lasting protection with water-repellent properties used for parquet floors, saunas, outdoor furniture, wooden structures.

Composition:

Product based on SiO2 and water.

Product features:

Hydrofob, UV resistant
Permanent
No negative influence on the visual appearance
Spray application very easy
Let the treated surface to breathe
Physiologically harmless
Short drying
Ecological used in food
biocompatible
Temperature resistance up to 450 ° C (peak temperature)
odorless
Corrosive, irritant

Application technique:

NANO-PROTECT ® wood is ready to use and should not be mixed.

To achieve a lasting effect lemons material must be clean and degreased.

®pentru PROTECT nano-timber to be sprayed from a distance of 15 cm on wood .A optimal protection is applied by spraying two or three times a wet - on - wet the surface of the wood. The product should be applied as evenly.

For application to the film (nonu£oase) spray a relatively small amount and spread with a cloth. The excess is left to dry.

If problematic and sensitive surfaces, we recommend testing the product stability on an inconspicuous area.

Storage temperature: 4 ° C to 30 ° C

Shelf life: The shelf life for a sealed package (original) is at least two years. Once opened, the product must be stored dry and cool and used within six months.

Drying time / Strengthening applied to the substrate: Once dried the product applied to the fabric, it can be packaged and stored. Optimum curing is obtained after a drying period of 24 hours at ambient temperature (20 ° C / rH65%), but the curing may be accelerated by additional heat.

Consumption: NANO-PROTECT ® consumption of wood and leather depends on the absorption capacity of the surface and varies from 20 to 50 g / m2.

Cleaning Instructions: Fresh stains are absorbed with a cloth / absorbent towel.

Caution: Do not rub! The spray dried water stains or very little water with detergent and then is absorbed by an absorbent servent. The process repeats until the stain is removed. Follow the manufacturer of wood.