Woodworking Plans

Quartz Silicate primer for plasters EMEX

The product Quartz Silicate primer for plasters EMEX is sold by Romtehnochim company and is part of the Render Primers product category. For more details (pricing, promotions and expert advice) about the product Quartz Silicate primer for plasters EMEX you can contact the company Romtehnochim via an offer request below.
Quartz Silicate primer for plasters EMEX
Sold by: Romtehnochim -
Price: 158,4
Request A Quote
Your message has been sent.
captcha image
Quartz Silicate primer for plasters EMEX. Silicate Primer with Quartz Coating EMEX is a professional, water-soluble, potassium silicate, pigments, fillers, specific additives and quartz, for the superior preparation of exterior surfaces to cover with silicate structured decorative plasters. The existing quartz in the product creates anchor points on the surface, causing a maximum adhesion of the plaster to the substrate. The product has great resistance and protection against fungi, bacteria and molds.

Main Features:

- Very high adhesion to the support;
- High pore filling power;
- Low drying time;
- Reduces absorption capacity;
- Waterproofing;
- Increases the adhesion of the plaster to the substrate;
- Resistance to fungi and molds;
- Maintain the air permeability of the support;
- Non-polluting.

Fields of Use:

     EMEX Plaster Primer Silica Primer EMEX is used to prepare exterior and exterior surfaces of new and old civil and industrial buildings to cover them exclusively with silicate structured decorative plasters.
     The role of this priming primer is both to increase the adhesion of the plaster to the substrate with the quartz particles present in the product, and to prepare the surface by closing the pores and implicitly reducing the absorbability of the support. Waterproof, but breathable.
     It is used as an intermediate layer for covering the following types of surfaces: concrete, masonry, plaster and cement coats, old compact and resilient plasters, mineral aggregates of any type, old, dry, compact and absorbent mineral paint.
Do not apply on plasterboard, plaster or lime plasters, old resin-rich coatings, synthetic materials and resins, acrylic paints, glue or casein paints, lacquers, oil paints, etc.
     It is recommended to remove any old paints and perform tests for each type of substrate to which the primer or priming primer and silicate plaster will be applied.
     Removing traces of existing dirt or molds will use the EMEX Forte Cleaner.
     The application of this priming primer is strictly limited to a EMEX Silicate Plastering System and EMEX Silicate Paints.

Technical Data Sheet: http://www.emex.ro/Doc/Grund-Silicatic-Amorsare-Tencuiala.pdf

Products in the same category: Render Primers