Woodworking Plans

Quartz silicone primer for plasters EMEX

The product Quartz silicone primer for plasters EMEX is sold by Romtehnochim company and is part of the Render Primers product category. For more details (pricing, promotions and expert advice) about the product Quartz silicone primer for plasters EMEX you can contact the company Romtehnochim via an offer request below.
Quartz silicone primer for plasters EMEX
Sold by: Romtehnochim -
Price: 124,6
Request A Quote
Your message has been sent.
captcha image
Quartz silicone primer for plasters EMEX. The EMEX Primer Silicon Primer for Primer Coatings EMEX is a professional waterproofing product based on acrylic polymers, silicone resins, specific additives, fillers and quartz, for the superior preparation of exterior surfaces in order to cover them with silicone structured decorative plasters. The existing quartz in the product creates anchor points on the surface, causing a maximum adhesion of the plaster to the substrate. The product has a special elasticity and protection properties against fungi, bacteria and molds.

Main Features:

- Very high adhesion to the support;
- High pore filling power;
- Low drying time;
- Reduces absorption capacity;
- Waterproofing;
- Increases the adhesion of the plaster to the substrate;
- Resistance to fungi and molds;
- Maintain the air permeability of the support;
- Non-polluting.

Fields of Use:

     The EMEX Plaster Primer Silicon Primer EMEX is used to prepare the exterior surfaces of new and old civil and industrial buildings in order to cover them with structured decorative plasters.
     The role of this priming primer is both to increase the adhesion of the plaster to the substrate with the quartz particles present in the product, and to prepare the surface by closing the pores and implicitly reducing the absorbability of the support. It is impermeable to water, but it allows the breathing of the support, which ensures the prevention of dampness.
     It is especially recommended for new buildings that still work because of its outstanding elasticity.
     It is used as an intermediate layer for covering the following types of surfaces: concrete, masonry, lime-cement plasters, lime plasters or gypsum plasters, new or old plasters based on binders, plasterboard, mineral aggregates of any type , old, organic or mineral paint, dry, compact and absorbent.
     Removing traces of existing dirt or molds will use the EMEX Forte Cleaner.
     Although there are no restrictions on the use of this priming primer, it is recommended in the EMEX Silicate Plastering System and EMEX Silicone Extruded Surfacer.

Technical Data Sheet: http://www.emex.ro/Doc/Grund-Amorsare-Tencuiala-Siliconica.pdf

Products in the same category: Render Primers