EMEX RUST rust remover solution STOP.
Rust Removal Solution EMEX RUST STOP is a professional product based on weak and strong acids, sulphurous salts, surfactants and organic solvents, made especially for the complete cleaning of rust or tunnel on metal surfaces as well as for treatment and preparation especially by phosphating them for painting or galvanizing.
The phosphating solution is also used to remove organic contaminants such as fats from any metal surfaces.
- Effectively removes rust and tuner;
- Very fast response;
- Good cleaning performance;
- Low contact time;
- Low consumption;
- Limited action on affected areas;
- Phosphating action;
- Action on other contaminants;
- Good preparation for chemical coatings.
Fields of Use:
Rust Removal Solution EMEX RUST STOP is a professional surface cleaning and phosphating product used for preparation for dyeing or electrochemical coating.
It is also used to remove other contaminants, such as fats, from the surfaces to be covered.
For strong areas affected by rust, grease or other contaminants, pre-treatment (wire brushes, abrasive paper, etc.) is recommended.
The product is applied only with a brush, or in specially designed washing baths. After thoroughly cleaning the stand, it will be washed with cold water to remove inorganic substances and then dried. Priming will be done within 2 hours
The product does not impose any restrictions on the type of primer to be applied, it being selected only depending on the support, application and performance desired.
EMEX DUAL PROTECT can also be used, combining the anti-corrosion and anti-corrosion properties of the primer with the decorative elements of the alkyd enamel.
The rust removal solution has the same effective action for any type of metal surface, no matter what its destination.
Technical Data Sheet: http://www.emex.ro/Doc/Solutie-Indepartarea-Ruginii.pdf