Construction type adhesive glue for EMEX.
Aracet Construction Adhesive EMEX is a plasticized admixture based on polymers, extenders and additives to improve the adhesion, adhesion and weathering properties of ceramic tile adhesives as well as products such as: lime, huma , mortars, etc. The product has very high grip and high penetration strength. If there is dampness or other old molds on the support to be used, use the Forte EMEX sanitizer beforehand.
- Very high adhesion to the support;
- Low drying time;
- Easy incorporation and application;
- Improves the plug;
- Increases adhesion of binders;
- Usable as binder for repair;
- Increase the applicability of the basic products;
- Can be used as a primer for mineral materials;
Fields of Use:
Aracet Construction Adhesive EMEX is used as an additive for cement-based adhesives, plasters and mortars. It is also used to improve products such as washable lime, huma, etc., or, at a correct dilution, even as a primer prior to the application of washable paints or for the preparation of plasters.
This type of adhesive is compatible with the following types of mineral substrates: concrete, masonry, lime-cement plasters, lime or plaster plasters, new or old plasters based on binders, gypsum boards, mineral absorbent conglomerates of any type, old organic or mineral paint, dry, compact and absorbent.
It can also be used successfully on other surfaces such as: OSB, MDF, chipboard, plywood, panel, canvas, cardboard, asbestos, expanded polystyrene.
The EMEX Construction Adhesive, although having its first use, improves the properties of cements, mortars and cements due to its very good properties, can also be used to bond various elements used in construction (such as paneling, expanded polystyrene sheets, etc.).
If the adhesive is used for bonding, the support should be prepared prior to application; the surfaces must be smooth, flat, dry, resistant. It must be taken into account that concretes containing additives such as silicates, polyvinyl alcohol, waxes, etc. may adversely influence the adherence of the product.