Exterior paint economy NEOM.
NEOMATT's Economical Extruder Paint is a water-soluble dispersion based on Latex acrylic polymers, specific additives and fillers, for finishing exterior surfaces with high whiteness, good adhesion to the substrate, good display and matt appearance. Under the proper preparation of the support, this type of paint provides good film characteristics, at low prices and with very good yield. It is very easy to apply and is made in any shade according to the NCS card, or it can be colored later with coloring pastes.
- Good adhesion to support;
- Good coverage;
- Grade high white;
- Matt appearance;
- Low drying time;
- Easy application and maintenance;
- Coloring in any shade;
- Vapor permeability and water impermeability.
Fields of Use:
NEOMATT Exterior Economic Washable Paint is used to protect and decorate the exterior surfaces of new and old civil and industrial buildings of various structures.
Under the conditions of a correct preparation of the support, this washable paint has a good resistance to weathering, moisture, etc. It is not suitable for areas exposed directly to excessive dirt, dust, grease or abrasion (eg curbs, road rails, passages, etc.). It is recommended for medium exposure areas, both in civil and industrial buildings.
It is used as the final coat to cover the following types of mineral base surfaces: concrete, masonry, lime-cement plasters, lime or plaster plasters, new or old plasters based on binders, gypsum boards, mineral conglomerates absorbent of any type, old organic or mineral paint, dried, compact and absorbent.
It can also be used successfully on other surfaces such as: OSB, MDF, chipboard, plywood, panel, canvas, cardboard, asbestos, expanded polystyrene.
Areas attacked by mold or fungi will be cleaned with Sanitizant Forte EMEX.
Pre-treatment of new or repaired surfaces is required before applying the paint. Obviously, new surfaces will be prepared with EMEX Wall Primer or EMEX Anti-molding primer.